Start your mount and setup a COM port or find which COM port it’s using in windows
Run GS Server from the desktop shortcut.
Click the 3 bars to open and configure the settings.
Be sure to set COM port, Baud Rate, Alignment Type, Mount Type to SkyWatcher, and Observatory Location.
Click the Close button and exit GS Server
Open your planetarium program and select an ASCOM connection.
In the ASCOM chooser select ASCOM.GS.Sky.Telescope and click Ok or Close
Click Connect from your planetarium program.
GS Server will start and connect to the mount. If you do not connect check your settings and click the ‘Connect’ button.
Connect other applications to GS Server as needed.
If guiding with PHD2 you will want to check mark the option “Reverse Dec output after meridian flip”
Please restart GS Server if you changed the hemispheres in the Observatory Location.
WARNING – Ensure all mount cables allow free movement. Alt / Az mounts can track up to 210 degrees Eastwards or Westwards from North. After power loss the mount must be returned to the home position by hand.